Win4Yaesu Suite also supports DX4WIN, DXKeeper, Logger32, WinLog32, Logic 9, N1MM+, NAP3 and any hardware device that supports the Yaesu FTDX radios via serial port interfaces and standard CAT commands. Win4Yaesu Suite also comes with a Ham Radio Deluxe compatible server interface allowing HRD LogBook and DM780 to connect and log frequency band and mode information. Point and click control of the Yaesu radio functions without using dual purpose buttons or entering menus.īuilt in Spotting using your ClubLog profile!Īccess to the Radio Menus: Ability to export and import all settings to a file!Īnd of course Win4Yaesu Suite comes with built in Panadapter software The HamStationUltra package for Windows is designed specifically for the Kenwood TS-2000, Yaesu FT-2000 and Ten-Tec Jupiter/Pegasus transceivers. All functions are provided in an easy to use interface that easily allows control of many options that are hidden in the Yaesu radio interface. That's what it took to get my SCU-17 to work with the FT-950.Win4Yaesu Suite is a windows control program for the Yaesu FTDX-1200, 3000, 5000, 9000 and FT-991 / A transceivers supporting options such as the LPPAN Panadapter and the SDRPlay. I have my power set to 100 watts in the radio and am able to control the ALC and power out using the TX control on the SCU-17. WK1J (posted info above) has the procedure for setting up the windows sound card. I do have the "Revers left and right channels" checked in Fldigi sound card settings. In the FTDX-1200 the setting is USB DATA to get it to work. Set the rig to USB-PKT mode to get the SCU-17 to send the data. A free application that controls up to 4 Icom, TenTec, Kenwood, Yaesu, Elecraft, FlexRadio, Alinco, or Kachina transceivers, switching between them manually or automatically based on frequency, and displaying frequency-dependent settings for devices like tuners and amplifiers includes a bandspread and transverter support. The SCU-17 settings in Flrig do not work and W1HKJ suggested using the PTT via CAT and it worked. Disregard the standard PTT port for the SCU-17. Also in Flrig check PTT via CAT to key the rig. I have 2 stopbits and Echo checked in Flrig. I used Flrig and set the com port for CAT at whatever your computer assigns the enhanced port number to mine was com2 and set the baud rate to match what you have the FT-950 set to. SCU-17 has 2 com ports one enhanced for CAT control and one standard for PTT. Steve, My settings to get the SCU-17 to work with the FT-950. On the FTdx5K the Data gain and Data Out levels help fine tune your setup. This is key for data signals from the SCU-17 Adjust the TX control on the SCU-17 until there is no ACL shown on the FTdx5K meter, but still TX lights up on the display of the FTdx5K.Īdjust the sound card for 0dB on Playback and Receive. Click the Tune button on the FLdigi main menu (suggest using a dummy load if possible). On the FTdx5000MP press the MENU button and rotate to menu 069 = data, menu 070 = Data gain = 50, menu 071 = Data Out, VFO-A, menu 072= Data Out Level = 60 (best for me and my antennas, experiment ). Select Autostart and lick “locate and browse to the directory for flrig. Select the Right channel and select Modem signal on left and right channels. Select Settings, Sample rate, Capture= Auto, Playback=Auto. Select PortAudio, and Capture = SCU-17, Playback = SCU-17, Select the Audio tab, then select Devices. Select the rig control, select flrig and check Enable flrig xcvr control with fldigi as client. Your SCU-17 sound card Rx and TX are now set properly for FLdigi. Mine is at -0.2bd, close as I could get).Click Save. Agn move slider as close to 0dB as possible. Select Record Tab, select Properties, make sure you are in dB and not percent. Move the slider as close to 0 dB as possible. Select Playback Tab, select Properties, make use the slider is in dB and not percentage (that is what got me!). In the windows mixer (I am on Win 8.1) Open Windows sound Icon: Consider putting three poles thatll troll two baits. SCU-17 TX at 12 o’clock (agn adjust later), currently at 40 o’clock (20 minutes of the hour)Ģ. Accessories will upgrade the results noted during every fishing occasion. SCU-17 RX at 12 o’clock (adjust later for RX), my final setting is 10 o’clock I have made over 100 PSK31 and 100 RTTY contacts on 5 bands with this setup. I have a Yaesu FTdx5000MP with the SCU-17 sound card interface, using the Yaesu SCU-21 Data bacle (one din plug for Data, the other for FSK RTTY) and using Fldigi 14.0.14 and Flrig 1.3.37 and everything work great here.
0 Comments
Leave a Reply. |